MX10EXA
FEATURE
- 4.5V to 5.5V
- 64K bytes of on-chip Flash program memory with In System Programming capability
- Five Flash blocks = two 8k byte blocks and three 16k byte blocks
- Single supply voltage In-System Programming of the Flash memory, (VPP=VDD or VPP=12V ifdesired)
- Boot ROM contains low level Flash programming routines for In-Application Programming and a default serial loader using the UART
- 2048 bytes of on-chip data RAM
- Supports off-chip program and data addressing up to 1 megabyte (20 address lines)
- Three standard counter/timers with enhanced features
All timers have a toggle output capability
- Watchdog timer
- Two enhanced UARTs with independent baud rates
- Seven software interrupts
- Four 8-bit I/O ports, with 4 programmable output configurations for each pin
- 30 MHz operating frequency at 5V
- Power saving operating modes: Idle and Power Down.Wake-Up from power-down via an external interrupt is supported.
- 44-pin PLCC (MX10EXAQC) and 44-pin LQFP (MX10EXAUC)...
